THE BUILDING PRODUCT E-BULLETIN

NEWSLETTER SIGNUP
Airtightness is much more than just the right product, it’s the right system…
DuPont™ Tyvek® and AirGuard®

DuPont Protection Building Solutions, BBSP1, Bristol & Bath Science Park , Dirac Crescent, Emersons Green, Bristol, BS16 7FR

T: 0117 970 9454/9455/9456
E: tyvek.construction@dupont.com
W: http://www.construction.tyvek.co.uk

Airtightness is much more than just the right product, it’s the right system…

DuPont’s holistic approach achieves extraordinary results at BRE

There is an increasing awareness in the market of both the importance of airtightness, and the complexity of getting it right. However, there is a simple solution: work with a proven system of fully tested products – and the expert team behind them. Recently, a ‘passive house’ demonstration bringing together key DuPont membranes, AVCLs, tapes, sealants – and crucially – correct installation methods, was undertaken at BRE with very impressive results.

The following products were fitted to a specially built structure, taking great care to correctly seal at laps and penetrations, and in all corners, curves and awkward spaces: Tyvek® Supro to the roof, Tyvek® HouseWrap to the exterior walls, AirGuard® Control AVCL to the interior walls, Tyvek® tapes throughout, plus the newly launched Tyvek® FlexWrap EZ tape to windows, doors, rafters and floors, and finally the latest low emissivity Tyvek® membrane to the external wall.







DuPont™ AirGuard® AVCL & Tyvek® tapes at BRE DuPont™ DuPont™ Tyvek® Housewrap & Tyvek® tapes at BRE

A blower door was fitted and the structure pressurised to the industry standard 50Pa. Results were recorded after each stage of application and the final figure came in at 0.12 m3/hr/m2 @50Pa (0.24 ACH). This is well below the exacting Passivhaus standard of 0.6 ACH, which is equivalent to around 0.3 m3/hr/m2 @ 50Pa.

Airtightness can be straightforward to achieve if using the right products and systems, but

there can be no weak link in the chain. A reduction of specification quality or incorrect installation will risk disappointing results. Both the BRE test and extensive field experience show that there’s simply no substitute for quality and expertise, making the holistic approach from DuPont particularly indispensable.

For more information about DuPont™ Tyvek®, FlexWrap and AirGuard® and in the UK please visit: www.construction.tyvek.co.uk or call 01275 337 660 (087 922 2740 in ROI)

View Previous Article

View Next Article